6.2.13

no-sew roman shades

Two weeks ago I revealed my $150 {family room make over}.  Remember the new shades that were painstakingly made on my kitchen island?  All six of the little beasts. 


I received some requests for a tutorial so I went into my blogging folder and found some pictures I snapped while I was making them.  Lucky.

HOW TO MAKE NO-SEW, STATIONARY ROMAN SHADES

1.  Cover a flat work surface with some form of heat protection from an iron (I used striped ticking)

2.  Cut your lining out the exact finished length and width you want your shade to be

3.  Cut your fabric out two and a half inches bigger than the lining on the sides and bottom

*Note- my shades are the length of my window and one and a half inches wider than my windows on either side

4.  Layer the two fabrics with the shade material underneath the lining


5.  Fold the bottom and sides of the shade fabric two and a half inches over the lining, and iron it down.


 6. Purchase some fabric tape at your favorite craft store (I got this Peel n Stick from Hobby Lobby).  Run a long strip of it down the edge of the fabric you just pressed, iron the tape to the fabric.



7.  Peel the white tape protector off  of the clear, sticky tape. 


8.  Fold the fabric under a half inch or just until the tape is tucked under and no longer shows.  Iron the tape again on high heat with steam.  You might have to hold it down for a while if you're working with heavier fabric


The sides and bottom of the shade are finished, but the top of the shade will still be loose


And here's where I stopped taking pictures.  It must have been 1 in the morning and well, maybe I was bitter at the fact that I had to make 6 of these little fetchers. I was probably done snapping pictures of this fabric I'd been staring at for the last 3 days and so this is where it ends.  I'll explain the next part in detail and give you a few more pics of the finished product, ok?

Next comes the rings.  If you're smart you'll find someone who owns a T-ring gun and it will save you hours of sewing little gold rings on the back of your shades.  If your making one, not so painful.  If you're doing six, excruciating!


9.  Fold the shade on your flat work space the way you want it to be when it's hanging, and make small marks on the folds where you'll eventually sew the rings in place.  It's easiest to mark one row (start with the right or left side) first and use it as a guide to mark the other rows.

10.  Lay the shade flat and mark the back (with an erasable fabric marker) where you'll sew all the rows of rings. 

Example: rings would be sewn at the cross sections

*Note- I sewed five rows of rings up and four rows of rings across on my shades.  The folds in my shades are approx two and a half inches apart and the first row of rings is sewn approx.
nine inches from the bottom.
11.  Fasten the rings to the shade. If you're planning to sew them on, use a curved needle and clear thread. 

12.  Clip the rings together using a plastic ring or a zip tie. 



13.  Use a wooden dowel to brace the back of the shade so it doesn't collapse in the center.  I made a skinny cover for it and fastened it to the shade with rings. 

14.  Go to Home Depot and have a 1.5 x 1.5" board cut the exact width of your shade.  Cover it with the same shade fabric and a staple gun and then staple the top of the shade to the board.


I trimmed my shades with 2 and a quarter inch pewter, gross grain ribbon, taped on the sides and bottom. 

Happy no-sewing!



16 comments:

  1. These look amazing. I think I will be trying this soon too, hoping mine turn out half as well as these!

    Jenny
    Www.simcoestreet.blogspot.com

    ReplyDelete
  2. What a great tutorial! I had never heard of a t-ring gun before! I hope you did know someone who had one, that was a lot of rings to put in!

    ReplyDelete
  3. HOW are you guys being hacked like this? It makes reading the comments no fun, I am sure. Unless of course, you're lacking some mesh in your southern region, then this is a goldmine of information for sure.

    ANYWAY, what I love is how your shades take up visual space in the window without interrupting the light. And I love that you combine trim in an unexpected way... I never understand how you pick the trim when it's at the store, but by the time it is up on your fabric, I am convinced you're a textile savant.

    Maybe we will soon be treated with a mesh tutorial soon? Me and my southern region are on the edge of our seat.
    XOXO
    G

    ReplyDelete
  4. A lot of people are doing this DIY no-sew roman shades. Is it really that easy to do? I'm scared that I might not get it the first time and my shade will be ruined. Haha! Your tutorial is pretty easy to follow, maybe I'd give it a try and I will show you what it looks like after.

    ReplyDelete
  5. Minda- looks great! Ok- where did you get the drapery rods you have your panels hung from? I think they would be perfect for the panels I want to do in my kitchen. Thanks!

    ReplyDelete
  6. A $150 makeover for your family room is a bit extreme! How did you do that? That's so amazing! Anyways, the roman shades look divine! They match with everything else inside the family room. They don't look heavy or overwhelming. I love it! Roxie Tenner

    ReplyDelete
  7. These look great! I cannot wait to give them a try. I'm curious about what the purpose of the small rings are? Does the bigger ring simply hold the curtain up at whatever length you choose? Thank you so much!!

    ReplyDelete
  8. motorized shades window treatments are a significant upgrade, taking you one step closer to creating an energy-efficient Smart home. This is not science fiction; the concept is fast becoming a reality. Many of our products allow you to use third party systems in an effort to streamline the control of your motorized window treatments, thus, integrating such components as security systems, lighting, home entertainment, as well as climate control, all with one device.

    ReplyDelete
  9. That looks so great! I can't believe you made those shades. I saw some very similar, stylish roman shades in Berkeley CA.

    ReplyDelete
  10. This comment has been removed by the author.

    ReplyDelete
  11. Amazing!!!!
    Great tutorial also.
    Find out more, here .
    Thanks.

    ReplyDelete
  12. Having a window treatment is a simple way to enhance your window's appeal. It sets the mood you want to have for the room, while giving you the privacy you want. And this tutorial will be very helpful for everyone who would want to give their old window treatments a makeover. Thanks for sharing!

    Bob Ward @ Allure Window Treatments

    ReplyDelete
  13. Hi! How did you attach the board to the wall? Did you screw it in, or use rod attachments?

    ReplyDelete
  14. Hi! How did you attach the board to the wall? Did you screw it in, or use rod attachments?

    ReplyDelete
  15. I wish someone in my family was this crafty. Recently I bought plantation shutters because I am not crafty. I have tried but I am too much of a perfectionist. I bought my shutters from http://shenandoahshutters.com. They did a great job and I really love how they look in my home.

    ReplyDelete

We LOVE comments and we read every single one. Go ahead, make our day!
Mia & Jilly

Related Posts Plugin for WordPress, Blogger...